For plumbers, heating engineers and boiler service firms
Software for plumbers from the breakdown call to the next annual service
The call-out, the engineer's route, pressure readings at the boiler, the service report, the invoice and the replacement quote all stay with one customer and one boiler. Below we follow one communal boiler in Bristol from Monday's phone call to its next service date.
A real Bidmio screen with the demo data of a plumbing and heating company.
One communal boiler
How plumbing software works: 10 steps from breakdown call to the next service
Tom Harper runs Harper Plumbing & Heating Ltd in Bristol with two engineers and an apprentice. At ten past seven on Monday William Davies rings. He is the managing agent for Quillmere Court, a block of twelve flats across town, and the communal boiler has dropped below half a bar again overnight: no heating, and the residents have topped it up twice this week. This is how that breakdown runs in Bidmio.
1
Monday 7:10 · The call
The breakdown is logged while William is still on the phone
Tom opens a new request and picks William as the customer. Quillmere Court and its communal boiler come up straight away, because they are already on William's record. He ticks Breakdown, types what is wrong and where the plant room key is, and the request waits in Today's overview until someone is assigned.
Customer, address and boiler in three taps
Breakdown, scheduled service or inspection
Notes for the engineer, typed or dictated
SoloProfessional
A real Bidmio screen with the demo data of a plumbing and heating company.
2
7:30 · Engineer's route
The engineer sees the job on today's route
Once Tom assigns the visit and a time, it appears on the engineer's phone under My visits, in time order with the rest of the day. Each card shows the customer, the address, the device and the next thing to press. Navigate opens the map and Call rings the site contact, so nobody phones the office for a number.
Today's visits in time order
Waiting for parts and due-today labels
On my way, Start work and Back to work
SoloProfessional
A real Bidmio screen with the demo data of a plumbing and heating company.
3
8:15, in the plant room · Readings
Readings and photos go in at the boiler
In the plant room the engineer picks the boiler from the site's devices or scans its QR label. He saves the readings he takes: 0.4 bar system pressure cold and 64 °C flow. He can photograph the boiler and the pressure gauge before he touches anything, and the last visits on this boiler are one tap away.
Devices per site with serial number and location
Pressure, temperature and other readings
Photos before and after the work
SoloProfessional
A real Bidmio screen with the demo data of a plumbing and heating company.
4
9:40 · Work notes
What he did is written once and goes on the report
The engineer types, or dictates, what he found and fixed: a flat expansion vessel with a failed membrane and a relief valve weeping into the tundish, both replaced, the system refilled to 1.5 bar and bled. The text is saved each time he pauses and goes straight onto the service report for the customer. If the basement has no signal, the screen says the text is not saved and keeps it in the field, so he saves it again once he is back in signal.
Work notes saved as you type
Dictate instead of typing with cold hands
The same text on the customer's report
SoloProfessional
A real Bidmio screen with the demo data of a plumbing and heating company.
5
9:50 · Parts
The expansion vessel comes off the stock, not out of memory
Before he leaves the plant room the engineer adds the 18 litre expansion vessel from stock and notes the inhibitor and PTFE tape under other material. Stock goes down by one, the part is listed on the report and the office sees it on the job. Bidmio also suggests parts that usually go with this kind of visit.
Parts from the store or the van
Suggested parts for the visit
Hours rounded to the quarter hour
Professional
A real Bidmio screen with the demo data of a plumbing and heating company.
6
10:00, before he leaves · Service report
Pressing Done turns the visit into a service report
When the engineer presses Done, Bidmio drafts a service report from the visit: work, readings, hours and parts. William signs on the engineer's phone with a finger and the engineer signs below. As soon as both signatures are on it, Bidmio produces the PDF and emails it to William. In the office Tom adds the recommendation and the next service date.
Report built from the visit, nothing retyped
Customer and engineer sign on the phone
Report PDF sent by email
SoloProfessional
A real Bidmio screen with the demo data of a plumbing and heating company.
7
Monday 11:00 · Invoice
The repair is invoiced the same morning
From the signed report one button creates the invoice: two hours at £68, the expansion vessel and the sundries, with VAT at 20 % on each line, £238.44 in total. The invoice shows your bank details and payment terms, goes out as a PDF by email, and if William's office pays late it shows up in receivables with a reminder ready.
Invoice from the report without retyping
VAT rate on every line
Overdue invoices and reminders in one list
SoloProfessional
A real Bidmio screen with the demo data of a plumbing and heating company.
8
Monday afternoon · Replacement quote
A quote for a new boiler goes out the same day
The boiler is fourteen years old and the heat exchanger is badly scaled, so Tom prices a replacement line by line: removal and disposal, a 115 kW condensing boiler, 24 hours for two engineers, the flue kit, a power flush and the gas tightness test and commissioning. £9,402.00 plus VAT, so William can compare it with other quotes line by line, not just by the bottom figure.
Your own price list for labour and parts
Installation by the hour, the boiler as one line
PDF with your company details
SoloProfessional
A real Bidmio screen with the demo data of a plumbing and heating company.
9
Wednesday evening · Customer says yes
William accepts the quote from a link
The quote arrives by email as a link. William opens it at home, shows the residents' committee and presses Accept. He could just as easily decline it, ask for changes, such as a different boiler make, or ask a question. Tom sees the answer on the quote, and the accepted quote becomes a job with the same lines.
Accept, decline or request changes
Customer questions kept with the quote
Your buying prices never shown
SoloProfessional
A real Bidmio screen with the demo data of a plumbing and heating company.
10
Next October · Next service
Next October's annual service is already planned
With the breakdown finished, Tom opens the next visit straight from it: the same customer, address and boiler, marked as a scheduled service, due next October and already assigned to an engineer. Every device also keeps its service interval and next due date, and Service results lists the boilers, pumps and cylinders due in the next 30 days. William does not have to remember the annual service; it is already on the plan.
Next visit opened from the finished one
Same customer, address and boiler
Devices due in the next 30 days
SoloProfessional
A real Bidmio screen with the demo data of a plumbing and heating company.
Why bother
The boiler is running again. The call-out is not paid yet.
In plumbing and heating the money leaks between visits: an hour waiting for a part, a washer from the van nobody wrote down, a report typed up on Sunday night, or an annual service the customer only remembers when the boiler fails in January.
Today
Breakdowns scribbled on the back of a delivery note
Only the engineer knows which boiler is on which site
Pressure readings in a notebook, the report typed up later
Fittings from the van missing from the invoice
Annual services left for the customer to remember
With Bidmio
Every request has an engineer, a date and a status
The address shows the boiler and its last visits
Readings and work notes typed at the boiler
Parts taken from stock land on the report
Devices due for service listed a month ahead
Free checks · 2 minutes
Check your business as a plumber
Run your own numbers: what to charge per hour, whether your quote makes money, what an employee costs and what your van costs per hour.
Open a plumbing and heating firm full of sample jobs
The demo account of a plumbing and heating company has breakdown call-outs, annual boiler services, heat pump and underfloor heating devices, an engineer's van stock, quotes, service reports and invoices. Click anything you like; the data is reset every day.
Service results lists every finished visit without an invoice, oldest first. Once a visit's report is signed and priced, its row shows the amount and a Create invoice button, so a quick washer change on a Tuesday does not end up as free work. A visit whose report still needs signatures or prices gets a button to finish the report, and a visit without a report opens its case.
app.bidmio.com
In detail
A plumbing and heating firm in Bidmio, in detail
The steps above follow one communal boiler. Here is how the other everyday work runs in the app: boiler services, pressure tests, emergencies, bathrooms, customers' devices, parts and margins, landlords and managing agents, and what else Bidmio takes off your plate.
An annual boiler service, from booking to signed report
An annual service starts as a scheduled request on the customer's boiler. You pick the customer, the address and the device, set the date and the engineer, and the visit appears on the engineer's route. Bidmio can email the customer the day before the visit, so fewer engineers stand at a locked door.
At the boiler the engineer works through the same five steps as on a breakdown: device, work, time and material, checks and finish. The checklist for the device type is ready, for example flue and air supply checked, condensate trap cleaned and gas tightness tested, and he ticks what he did instead of writing it out every time.
The report built from the visit carries the readings, the work, the hours and any parts. The customer signs on the phone and gets the PDF by email. If the email bounces, you resend it from the report with one button and see the delivery history for each recipient.
Bidmio keeps the record of the visit. The gas safety paperwork that the law asks for, such as a landlord gas safety record, is still issued by the Gas Safe registered engineer on the form he uses today.
Pressure tests, power flushes and commissioning
A pressure test on new pipework, a power flush or commissioning a new boiler is work in its own right, so it belongs on the quote as its own line. The customer sees what they pay for, and the line is not forgotten when the invoice goes out.
Readings from the test go on the visit as measurements, such as the pressure in bar and the temperature, with a photo of the gauge. You type them in by hand: Bidmio does not connect to flue gas analysers or pressure gauges, but the values stay on the customer's device with the date and the engineer's name.
When you come back to the same system a year later, the last visits on the device show what pressure the vessel was charged to and which parts were changed.
Emergency call-outs: fast, but with a paper trail
With water coming through a ceiling nobody fills in long forms. A short request with the address and what is wrong is enough. The engineer has it on his phone straight away, with navigation to the address in one tap.
On site he photographs the damage, notes where the stopcock is and what he repaired, and the clock runs by itself. Travel and work are timed separately, so the invoice and the timesheet both show how long the repair itself took. The photos and notes help the managing agent and the insurer later.
If the repair needs a part, the engineer switches the visit to Waiting for parts. The work clock stops while he waits and the visit stays on the list until somebody finishes it.
Each call-out as its own visit with its own invoice
Photos of the damage on the job, not in a personal camera roll
The follow-up repair as a new request for the same address
Quoting a bathroom refit and new pipework
A bathroom refit has many parts: strip-out, first fix water and waste, a concealed cistern frame, the shower valve, sanitaryware and second fix. Each part goes on the quote as a line with a quantity, a unit and a price, so the customer can compare your quote with two others line by line.
The quote goes out as a link. The customer accepts it, declines it or asks for changes, for example a different shower. The accepted quote becomes a job, and its lines can be invoiced in one go or in stages, such as a deposit up front and the balance once the second fix is done.
On a bigger job you see the budget next to the actual cost and the hours worked. If the engineers' hours are getting close to the budget, you know before the bathroom is finished, not after.
Customers' boilers, cylinders and pumps in one place
Each customer can have several sites, and each site its devices: a combi or system boiler, an unvented cylinder, a heat pump, a water softener, a circulation pump or an underfloor heating manifold. Each device keeps its type, model, serial number, location, warranty, service interval and next service date.
You do not have to type devices in one by one. A list from a managing agent or an old spreadsheet can be imported from a file, and you print QR labels for the devices. The engineer scans the label and the visit is attached to the right boiler.
The regular service list shows devices whose service is due soon or overdue, so you plan annual services ahead instead of waiting for a breakdown call.
Parts, vans and margin
Plumbers lose money on small parts. A washer, a valve or a couple of compression fittings from the van are easy to forget on the invoice. In Bidmio each stock item has a buying price and a selling price, from copper pipe and PEX to expansion vessels and condensing boilers.
Each engineer sees what his van carries and what is below the minimum, counts the van when asked and sends the office a refill request. Parts taken on a visit come off stock and appear on the report and the invoice. A merchant's receipt can be photographed and added to the job as an expense.
Customers only see selling prices. Your buying prices and margin are visible to you, so on every job you know whether the parts made money.
An invoice can go through approval before it is sent. The engineer or the office prepares it, the owner checks it in Approvals and approves it or sends it back with a question. A larger boiler replacement can be billed in stages, with a deposit invoice first and a final invoice at handover.
Landlords, managing agents and service contracts
Managing agents, schools and offices want regular plant room visits and one invoice. For such a customer you keep the service agreement, the devices and the visit dates. A recurring invoice for the agreement is set up once and goes out on its own.
After each visit the agent gets the report by email and can see the history of the plant room. You see which contract visits are done and which visits are not invoiced yet. Extra work outside the contract goes on a separate quote.
A callback after an installation is a new short visit on the same device. The original invoice stays untouched and you can see what the callback cost you.
In a block of flats the plant room often holds several boilers and pumps. Each has its own QR label, its own readings and its own history, so at the annual service you can see which boiler lost pressure last winter and which one had its heat exchanger changed.
What else Bidmio saves a plumbing firm
There is often no signal in a basement plant room. The engineer's Workzone records hours offline and sends them when he is back upstairs. When an engineer arrives at a job address, his phone can suggest a time entry and he only confirms it.
Invoices from your plumbers' merchant can arrive by email straight into Bidmio. The AI reads the supplier, the total and the VAT and suggests which job they belong to. When expansion vessels or fittings in stock fall below the minimum, Bidmio suggests an order to the supplier, and now and then you count the vans and the store.
If a customer has not answered a boiler quote for a week, an automatic reminder from your own template can go out, and a thank-you after the invoice is paid. Engineers request holidays on their phones and see their own hours.
A spoken work report records the whole day in one go. In the Work zone, or from the job's options menu, you record up to three minutes: which job, who worked how long, what was done and what material went in. If you would rather not talk, type it. Bidmio turns it into hours, material from the van, from the price list or as a one-off item, and a site diary note. You check every line, and nothing reaches the job until you tap Save to project. Whoever may create invoices then taps Create invoice draft on the saved report and gets a draft partial invoice with exactly those hours and that material; nothing is issued or sent. Reports still without a draft wait for the office on the invoice list under Spoken reports. It needs AI switched on and uses AI credits.
Vehicle log for the vans and mileage claims (Professional)
Orders to suppliers by minimum stock and stock counts (Professional)
Automatic quote reminder and thank-you after payment
Bank statement import and matching payments to invoices
Company website with a form where a customer sends you a photo of the leak
Photo report in PDF for the landlord or the insurer
Reminder email to the customer the day before the visit
Spoken work report: hours, material and a diary note from one recording, then an invoice draft
What Bidmio does not do for plumbers
Bidmio does not calculate heat losses or size pipes and radiators. For heating design you keep your own calculation tool or a designer. Readings from the flue gas analyser and the pressure gauge are typed in by hand, and Bidmio does not issue Gas Safe paperwork, landlord gas safety records, Benchmark checklists or Building Regulations notifications. Those stay with the registered engineer and the schemes he works under.
Bidmio is not your UK accounting or tax software. It does not file VAT returns under Making Tax Digital, does not handle CIS deductions or returns and does not replace Xero, QuickBooks or Sage, and it does not send UK e-invoices. Invoices are paid by bank transfer to the account printed on them; there is no card payment link on the invoice. Your accountant keeps the books; you send them the invoices and expenses from Bidmio.
Typical jobs
Software for everything a plumber and heating engineer does
From a dripping tap to the heating in a new build.
Burst pipes and leaks
A night or weekend call-out as its own visit with its own invoice. Photos of the damage stay on the job for the landlord, the managing agent and the insurer.
Boiler breakdowns and replacements
Readings, work notes and a signed report at the boiler. When a repair is not worth it, the replacement quote goes out the same day.
Bathroom refits
First fix, second fix, sanitaryware and tiling by others, priced in stages. Engineers' hours and parts collect on one job.
New build plumbing and heating
Pipework and radiators at a fixed price, extras invoiced separately. Budget and actual cost side by side as the job goes on.
Heat pumps and underfloor heating
The unit at a fixed price, the hours on top. The heat pump and the manifold stay on the customer's site with a serial number and a service date.
Annual services and contracts
Yearly boiler services for landlords, schools and offices. You see which devices are due and share the visits between your engineers.
Switching
What you can stop using
One app instead of a diary, spreadsheets and a separate invoicing tool. Customers and their devices come across from a file, and we help you move over on a call.
Plans in euros, your invoices in poundsBidmio plans are priced and billed in euros, so your card or bank converts the monthly amount to pounds. Everything your plumbing business sends to customers, quotes and invoices included, is in pounds with UK VAT.
Your accountant keeps the booksInvite your accountant as an external user for the companies you choose and remove the access in one click. They see the invoices, receipts and bank matches, or you send a CSV export. Bidmio does not file with HMRC and does not replace Xero, QuickBooks or Sage.
Questions plumbers and heating engineers ask about Bidmio
Can I keep customers' boilers and other devices in Bidmio?+
Yes, on Solo and Professional. On each customer's site you record the boiler, cylinder, heat pump, softener or pump with its serial number, location, warranty and next service date. You can import devices from a file and print QR labels for them.
Can my engineers record readings at the boiler?+
Yes. During the visit the engineer saves readings such as pressure and temperature, or any other value, against the device, with photos. Values are typed in by hand; Bidmio does not connect to analysers or gauges.
Does Bidmio produce Gas Safe certificates or landlord gas safety records?+
No. Bidmio records the visit, the readings, the work and the signatures and sends the customer a service report. Certificates and records required for gas work are still issued by the Gas Safe registered engineer on the forms he uses today.
How is the service report made?+
From the visit. When the engineer presses Done, Bidmio drafts the report from the work notes, hours and parts. The customer signs on the phone, and once both signatures are on it the customer gets the PDF by email. You then create the invoice from the signed report.
How do I quote a boiler replacement or a bathroom?+
Line by line from your own price list: removal, the boiler, installation hours, flue kit, power flush and commissioning. The customer gets a link, accepts or asks for changes, and the accepted quote becomes a job.
Are engineers' hours recorded automatically?+
On a service visit, yes. Travel and work are timed separately, waiting for a part or for the customer does not count as work, and the hours are booked to the job when the visit is finished. On bigger jobs engineers log hours on the timesheet.
Does Bidmio replace my accounting software or file with HMRC?+
No. Bidmio does quotes, jobs, invoices, expenses and payment matching, but it does not file VAT returns under Making Tax Digital, does not do CIS and does not replace Xero, QuickBooks or Sage. Your accountant keeps the books.
Can I try it without signing up?+
Yes. The demo account of a plumbing and heating firm, with devices, visits and service reports, opens with one click. On your own jobs you then get First month 90% off.